LEE – Classic Bullet Sizing Kits .309

Description

LEE – Classic Bullet Sizing Kits .309

Fastest and easiest way to lubricate and size cast bullets. Standard 7/8 x 14 threads fit any reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.

• Steel sizing Die
• Sizer Punch
• Sturdy plastic container

FEATURES:

• Standard 7/8 x 14 threads are compatible with most brands of Single Stage Presses.
• Bullets are pushed through the sizing die nose first, no special nose punches are needed.
• Gas checks are automatically seated and crimped in place.
• Sized bullets are captured in the special container.

SIZING BULLETS:

• Screw the sizing die into any standard reloading press. Exact depth is not important. Install the bullet punch into the ram. This fits all rams that use standard shellholders. Place the red plastic container with the lubed bullets inside, on top of the sizing die. Place bullet on the punch and push the bullet through the die. When 3/4 of the bullets have been loaded, lift the red plastic container off the die. Invert the holder before opening. For rifle and hot pistol loads, it is best to relube the bullets to ensure the sized portion is recoated.